dispersive antiscale corrosion inhibitors JN-1 - Names and Identifiers
dispersive antiscale corrosion inhibitors JN-1 - Physico-chemical Properties
Physical and Chemical Properties | This product is a dark brown liquid with the pungent odor of ammonia. The relative density (20 deg C) 1.30~1.40. Viscosity (25 C) 14 x 10-3~23 x 10-3 Pa s. |
dispersive antiscale corrosion inhibitors JN-1 - Introduction
JN-1 dispersion corrosion inhibitor is a commonly used corrosion inhibitor with the following properties:
1. dispersion: JN-1 dispersion corrosion inhibitor can form a stable dispersion system in water, can be evenly dispersed on the surface of the metal to form a protective layer, improve the corrosion resistance of the metal.
2. corrosion inhibition: JN-1 dispersion corrosion inhibitor can effectively slow down the corrosion rate of metal materials, prolong the service life of metal.
3. wide range of application: JN-1 dispersion corrosion inhibitor is suitable for all kinds of metals, including iron, steel, aluminum and other common metal materials.
The main uses of JN-1-dispersible corrosion inhibitors include:
1. anticorrosive coatings: JN-1 dispersion corrosion inhibitor can be used in the formulation of anticorrosive coatings to improve the corrosion resistance of the coating.
2. metalworking fluid: JN-1 dispersion corrosion inhibitor can be used in metalworking fluid to prevent corrosion of metal materials during processing.
3. rust inhibitor: JN-1 dispersion corrosion inhibitor can be used in the formula of rust inhibitor to protect metal products from moisture, acid rain and other environmental corrosion.
The preparation method of JN-1 dispersion corrosion inhibitor is usually by dissolving the active substance in a suitable solvent, and after blending and process treatment, a stable dispersion system is formed.
For safety information, the following precautions should be observed when using JN-1 dispersible corrosion inhibitors:
1. storage should avoid contact with fire sources, heat sources, oxidants, etc., to prevent explosion and fire.
2. Wear protective glasses, gloves and protective clothing during use, avoid contact with skin and eyes, and avoid inhaling aerosols.
3. In case of contact with skin or eyes, rinse immediately with plenty of water for at least 15 minutes and seek medical help.
4. The waste shall be classified, transported and disposed in accordance with relevant laws and regulations to avoid environmental pollution.
Last Update:2024-04-09 20:02:46